Frequently Asked Question
MNPV16-24 DEAD FRONT Does not fit with breakers.
Last Updated 5 years ago
The DEAD FRONT on the MNPV16 has a "LIP" on the left & right sides of the cut-outs.
This LIP presses on the FUSE HOLDERS fine but causes the DEAD FRONT to be pushed out when used with breakers.
You need to use a sharp tool such as a wood chisel to remove the "LIP" to allow the DEAD FRONT to lay flush.
HINT: To open pictures RIGHT-CLICK and Open in new TAB.
This LIP presses on the FUSE HOLDERS fine but causes the DEAD FRONT to be pushed out when used with breakers.
You need to use a sharp tool such as a wood chisel to remove the "LIP" to allow the DEAD FRONT to lay flush.
HINT: To open pictures RIGHT-CLICK and Open in new TAB.