Frequently Asked Question
KID - Stuck on BOOTLOADER 2.5
Last Updated 6 years ago
So, you meant to select FACTORY RESET in the TECH MENU and Pressed FIRMWARE UPDATE by mistake.
You power the KID down but it powers right back up in BOOTLOADER 2.5 Firmware Update mode, now what, PANIC?, no.
Don't PANIC, power OFF the KID completely and let it set OFF for 30 seconds.
Now HOLD the SETUP Button and turn only the Battery power ON.
The Display should say FORCED UPDATE MODE. Now power down the KID for 30 seconds then back on.
It should be back to normal unless you have very old firmware in which case you will need to complete the firmware update.
You power the KID down but it powers right back up in BOOTLOADER 2.5 Firmware Update mode, now what, PANIC?, no.
Don't PANIC, power OFF the KID completely and let it set OFF for 30 seconds.
Now HOLD the SETUP Button and turn only the Battery power ON.
The Display should say FORCED UPDATE MODE. Now power down the KID for 30 seconds then back on.
It should be back to normal unless you have very old firmware in which case you will need to complete the firmware update.