Frequently Asked Question

CLASSIC - WHAT IS VMM and HOW DO I DO IT ?
Last Updated 6 years ago

It has become industry slang for our FACTORY RESTORE - Vulcan Mind Meld
WARNING!!!  This RESETS ALL your previous settings to FACTORY DEFAULTS !

First the Classic needs to be powered completely OFF (Turn off circuit breakers, WHAT !! You don't have any!!)
This is not going to go well if you need to unhook wires because you have no circuit breakers installed, go install some first !!

Wait 20-30 seconds then hold in the LEFT & RIGHT Arrow keys (they are on either side of the ENTER button) and turn on ONLY the Battery breaker. Hold until you see the setup WIZARD start then release.

Now the unit has been set to all factory default settings and any new features added will be available.

NOTE:  The MNGP and CLASSIC Firmware are matched (in another FAQ) and BOTH need to be done.  VMM with mismatched firmware is going to cause issues and might even lock up the Classic requiring a HARDWARE RESET (in another FAQ)

Please Wait!

Please wait... it will take a second!